Lewmar 10′ 1/4 G4 Chain & 200′ 1/2 8 Plait Line
- Delivered today (order Mon-Fri before 12:00, delivery between 17:00 and 22:00)
- 30 days to change your mind and free returns
Description
Leading, global manufacturer and supplier of highly engineered products and customized solutions dedicated to shaping, growing, and bettering the RV, marine, automotive, commercial vehicle, and building products industries, and their adjacent markets.
Lewmar M10HT200PX Attributes
- Type:Rope-To-Chain Spliced Combination
- Diameter:1/2 Inch
- Length:200 Feet
- Material:Nylon
- With Shackle:Yes
Lewmar M10HT200PX Features & Benefits
- Designed To Complement The Rope-Chain Gypsies Fitted To All Lewmar Windlasses
- Calibrated For Even Pitch
- Hot Dip Galvanised To Minimize Corrosion
- Welded For High Strength
- Smooth Rope-To-Chain Transition
- Helps Your Windlass Operate Smoothly
- Limited 1 Year Warranty
Lewmar M10HT200PX Warranties
- Limited Warranty and Key Terms of supply by Lewmar INC.pdf
Lewmar M10HT200PX Technical Bulletins
- 69000331_BUL.pdf
Lewmar USA Premium 8-Plaited Nylon Anchor Rope
- 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes.
- 8-Plait carries the same tensile strength as 3-Strand.
- 8-Plait does not coil or create a “birds nest” in the locker like 3-Strand will. 8-Plait flakes and falls upon itself.
- 8-Plait will not twist and knot up.
- 8-Plait will not loop over onto itself.
- 8-Plait has less stretch so it will not bury itself deep into the gypsy’s grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded.
- 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs.
- 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand.
- 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker.
- 8-Plait should be soaked in water (salt or fresh – it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.
Eight braided bolts have some obvious advantages over three-strand bolts. First, the eight braided rods have a looser two-way braid that hangs over themselves, thereby reducing the gap between the coiled and denser wires found in the three twisted rods. The more air in the locker, the smaller the capacity of the line you can carry. Secondly, because the production line does not have a clockwise or counterclockwise offset, the rope will not be twisted or kinked, so that the windlass can better manage the rope. Third, eight braided ropes can withstand higher impact loads than three braided ropes. !!!!—-
PRODUCT ID: 1000911
SKU: NVN-1000911
CSKU: CWR-1000911
REWRITE: 1012022-lewmar-10-1-4-g4-chain-200
MPN: HM10HT200PX
UPC: 743683406287
ASIN: B000SMYMTU
WSKU: LEWHM10HT200PX
SSKU:
KSKU: LEWM10HT200PX
GSKU:
MSKU:
LSKU: 239-HM10HT200PX
NAME: Lewmar 10′ 1/4 G4 Chain & 200′ 1/2 8 Plait Line
NAME_EX:
PTITLE: Lewmar 10′ 1/4 G4 Chain & 200′ 1/2 8 Plait Line
TYPE: Anchoring & Docking | Anchoring Accessories
VENDOR: Lewmar
Google Category:
Amazon Category: Automotive Parts and Accessories
Amazon Title:
Google Title: Lewmar Hm10ht200px 8 – Plait Performance Anchor Rodes
Amazon Category: Automotive Parts and Accessories
Gtags:
Lewmar |
Anchor |
GSpecs:
Reviews
There are no reviews yet.